17
GETTING
ST
ARTED
SAFETY
/
SPECIFICA
TIONS
ASSEMBL
Y /
INST
ALLA
TION
OPERA
TION
TROUBLESHOOTING
MAINTENANCE
/
REP
AIR
16
OPERATION (continued)
USER CONFIGURATION MODE (continued)
PIN Menu
The first menu in the configuration mode is for the user to enter a Personal
Identification Number (PIN) to secure the configuration of the computer and continue
with making changes.
The default user PIN is 0000. Using this default PIN will unlock the meter unless the
PIN has been reset by the user.
The initial user PIN entry screen will show
0000. The left most digit will be flashing
ON/OFF to indicate focus if the user wants
to change the PIN. (See Figure 14-1)
Figure 14-1
If the entered PIN was incorrect, the screen
advances to the “Config Exit” menu (See
Figure 14-2) momentarily, then returns
automatically to normal operation display.
Figure 14-2
NOTE:
Using the user default PIN, or the user specific PIN (if previously reset), and
advancing focus to the next menu, the software will compare the entered PIN with the
PIN stored in the computer. If a match is found, the next menu will be shown allowing
the user to reset the PIN if desired.
Reset PIN Menu
If the PIN was entered correctly, the next menu will be displayed and allow reset of
the PIN if desired. (See Figure 15-1)
Figure 15-1
Figure 15-2
The “N” will be in focus (flashing). To decline resetting the PIN, advance focus to next
menu.
To reset the PIN, increment the “N” to “Y” (see figure 15-2) and advance focus to next
screen. (See Figure 16)
OPERA
TION
PIN
