-
8
-
© 2020 Great Plains Industries, Inc. All Rights Reserved.
Great Plains Industries, Inc. Australia
+61 2 9540 4433
FLOMECmeters.com
1.
The QS200 Owner’s Manual provides additional
information:
-
General Safety Instructions
-
Specifications
-
Assembly Drawing
-
Operation/Trouble Shooting
-
In-Depth Tee Retrofit Information
-
Parts & Service
-
Warranty (see last page)
2.
3.
DOWNLOAD QS200 Installation Detail (.pdf)
4.
DOWNLOAD QS200 Installation Detail (.dwg)
INFORMATION RESOURCES
GENERAL SAFETY INSTRUCTIONS
IMPORTANT: It is your responsibility to:
Ensure that all equipment operators have access to adequate instructions concerning safe operating and
maintenance procedures.
Compatibility of this product’s material and the process
fluid and/or environment should be considered prior to
putting into service.
Product should never be operated outside its published
specifications for temperature or pressure. See
specifications for your model.
When applying power, adhere to specifications listed in
appropriate electronics manual.
Make sure flow and pressure have been eliminated from
process pipe prior to installing or removing product.
This product is not approved for use with petroleum
products (diesel fuel, unleaded gasoline, jet fuel,
kerosene, etc.), aromatic hydrocarbons or other
incompatible chemicals
This product is not approved for use in hazardous
locations.
Disconnect external power before attaching or
detaching input or output wires.
Installation near high electromagnetic fields and high
current fields is not recommended and may result in
inaccurate readings.
Do not allow water to freeze in meter. Ice expansion may
burst the plastic housing.
Do not allow this meter to be used with steam.
NOTE:
Be sure O-rings and seals are kept in good repair.
08/20 IND-1126 Rev A QS200 Installation Guide
