11
Design Type: Electromagnetic
INLET AND OUTLET
NPT MODELS
QSE05NPT
1/2 inch NPT
QSE07NPT
3/4 inch NPT
QSE10NPT
1 inch NPT
QSE15NPT
1-1/2 inch NPT
QSE20NPT
2 inch NPT
BSPP MODELS
QSE05BSP
1/2 inch BSPP
(ISO 228 - G 1/2)
QSE07BSP
3/4 inch BSPP
(ISO 228 - G 3/4)
QSE10BSP
1 inch BSPP
(ISO 228 - G 1)
QSE15BSP
1-1/2 inch BSPP
(ISO 228 - G 1 1/2)
QSE20BSP
2 inch BSPP
(ISO 228 - G 2)
ANSI FLANGE MODELS
QSE30FAP
3 inch 150 # ANSI
Flange (Polymer)
QSE40FAP
4 inch 150 # ANSI
Flange (Polymer)
QSE30FAS
3 inch 150 # ANSI
Flange (Steel)
QSE40FAS
4 inch 150 # ANSI
Flange (Steel)
DIN FLANGE MODELS
QSE30FDS
3 inch DN80/PN10
Flange (Steel)
QSE40FDS
4 inch DN100/PN10
Flange (Steel)
WETTED COMPONENTS
Housing
NORYL™
GFN3 PPE+PS
Electrodes
316L Stainless
Steel
Temperature
Probes
316 Series
Stainless Steel
Pipe Plugs
300 Series
Stainless Steel
O-Rings
EPDM
(Ethylene Propylene
Diene Monomer)
MAXIMUM WORKING PRESSURE
De-rate maximum working
pressure 0.682 PSIG per each
degree
°
F above 70
°
F
NPT
150 PSIG @70
°
F
10.3 BAR @ 21
°
C
BSPP
150 PSIG @70
°
F
10.3 BAR @ 21
°
C
ANSI FLANGE
150 PSIG @70
°
F
10.3 BAR @ 21
°
C
DIN FLANGE
150 PSIG @70
°
F
10.3 BAR @ 21
°
C
POWER SUPPLY
Voltage
Requirement
Min. 12 VDC or
12 VAC, 50-60 Hz
(Lower voltage will
cause inaccurate
readings)
Max. 36 VDC or
30 VAC, 50-60 Hz
(higher voltage
may damage unit)
ELECTRICAL
Pollution
Degree
2
Installation
Category
1
Altitude
20000m Max.
IP67 rated enclosure.
CSA approved for indoor use only
See electronics manuals for
electronic specifications.
SPECIFICATIONS
