2
This instruction covers the installation of the “no display” electronic module
and the “display ready” electronic module with QSI1, QSI2, or QSI3
versions of communications electronics installed. The basic mechanical
installation is the same for all electronic modules. The wiring connections
and wiring diagrams differ depending on the electronic module being
installed.
MODULE CONTENTS
Check the contents of your module using the list below as reference.
•
(1) Completely assembled QSI module
•
(2) Butt-splice connectors.
•
(4) #4-20 x 7/8 in. Fillister Head Plastite® Screws. (For PVDF G2)
•
(1) Installation instructions
•
(1) Set of (4) Strain reliefs
Additional items included with
Display Ready
module:
•
(1) Display seal
•
(4) #4-20 x 7/8 in. tapping screws
•
(1) 10 pin male connector
FLOMEC APP FOR ANDROID
To learn how to get started using the FLOMEC App, visit:
flomecmeters.com/downloads/flomec-app-quickstart.pdf
FLOMEC APP QUICKSTART