FLORABEST FGH 700/9 series, Operation And Safety Notes

10

GB

IE

CY

3.  Slide the tine-wheel pair off the shaft 

(10).

4.  Clean the driveshaft with biological 

oil.

5.  Slide the new tines onto the drive-

shaft with the holes on the axles 

aligned to the holes on the driveshaft 

(21).

  Make sure that the tines are set to their 

proper turning direction. The arrows on 

the gearbox and tines should point the 

same way ( 

D

 No. 22).

6.  Slide the hex bolt through the hole 

and tighten on the self-locking nut 

(supplied with each new tine wheel 

pair 23).

Storage

•  Leave the motor to cool down before you 

put the tool into a closed space.

•  Keep the tool clean, dry and out of the 

reach of children.

Unscrew the wing nuts 

( 

A

 No. 4) and fold the 

fork grips down to reduce 

the space taken by the 

tool.

Make sure that the ca-
ble does not become 
jammed.

•  The frame tubing ( 

B

 No. 5) also serves 

as a hook to hang up the tool at the place 

of storage.

•  Do not cover the tool in plastic bags as 

moisture may form.

  Do not use the tool with the handle 

folded closed.

Guarantee

•  This tool is subject to a guarantee period 

of thirty-six months. A shorter guarantee 

period of 12 months shall apply for com-

mercially used and replacement tools ac-

cording to statutory regulations. 

If you have a justifi ed guarantee claim, 

please contact us at our service cen-
tre (see last page for our telephone 
number, fax number, and e-mail ad-
dress). We will then give you the de-
tails on the claims procedure.

•  Damage caused by natural wear, over-

load, or improper use is not covered by 

guarantee. Certain components are sub-

ject to normal wear and are not covered 

by guarantee. Such components particu-

larly include: tines.

•  Guarantee service is also conditional 

upon compliance with cleaning and main-

tenance instructions 

•  Any damage caused by faults in materials 

or manufacturing shall be remedied by 

free repair or replacement.

•  You may have repairs not covered by 

guarantee carried out for a charge at our 

service centre. Our service centre will be 

pleased to supply you with a cost esti-

mate.

We can only process orders on tools sent 

in with adequate postage and packing.

• 

Tools sent in by express, measurement 
cargo or other special forms of post-
age with freight collect will be refused.

•  We will dispose of tools free of charge.