FLORABEST FLh 2800 A1, Translation Of Original Operation Manual

34

GB

  Safety class II

General notes on safety 

•  This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been giv-

en supervision or instruction concern-

ing use of the appliance by a person 

responsible for their safety.

•   Children should be supervised to en-

sure that they do not play with the ap-

pliance.

•  Never allow children or other persons 

unfamiliar with the user manual to use 

the shredder. Local regulations or bylaws 

may determine the minimum age for us-

ing the shredder.

  Observe noise control and local regu-

lations.

  Caution! When using power tools, 

observe the following basic safety 

measures for the prevention of 

electric shocks and the risk of injury 

and fire:

Preparation:

•   Never use the shredder with other per-

sons or animals nearby.

•  Wear hearing and eye protection at all 

times when using the shredder.

•  Wear appropriate protective clothing 

such as protective gloves, firm footwear 

and long trousers. Do not wear loosely 

fitting clothes or clothes with dangling 

cords or belts.

•  Only use the shredder in the open (that 

is, away from walls or other rigid struc-

tures) on a firm, level surface.

•  Do not use the machine on a paved, 

gravelled area, which could be dam-

aged by ejected material.

•  Before you start up the shredder, check 

that all of the nuts, bolts and other fasten-

ings are tight. Covers must be fastened 

properly and in good working order. Re-

place any damaged or illegible stickers.

•  Only use replacement parts and acces-

sories supplied and recommended by the 

manufacturer. Using third-party parts will 

immediately invalidate the guarantee.

•  Do not leave the shredder working unat-

tended and keep it in a dry place out of 

children’s reach.

•  Only connect the shredder to a properly 

earthed mains power supply. Make sure 

that the extension cable and socket are 

properly earthed.

•  While being used in the open, connect 

the shredder to a residual current (RC) 

circuit breaker with a trip current of not 

more than 30 mA.

Working with the device:

•  Make sure that the funnel feeder is empty 

before you start the shredder.

•  Keep your head, hair and body away 

from the intake opening.

•  Do not reach into the funnel feeder during 

operation. The shredder will continue to 

run for a short period after you switch it 

off.

•  Always make sure you are standing in a 

firm, balanced position. Do not lean for-

wards, and never stand above the shred-

der when inserting materials. 

•  Make sure that the material inserted 

into the shredder does not contain hard 

objects made of metal, stone, glass or 

similar. 

•  Do not use the shredder in the rain and in 

bad weather. Work in daylight or under 

good lighting conditions.