Florian Schlumpf Time Machine TM3 Johann Instructions For Unpacking & Installing Download

Page: 4 / 5

Attach the pendulum

Ensure the point in front is exactly positioned in the conical

hole and the one at the back sits in the slot.

Installing the Time Machine TM3

Fabrical GmbH · Florian Schlumpf Swiss Timemaker

Sihlbruggstrasse 107 · 6340 Baar · Phone +41 78 613 19 16 · sales@schlumpf.swiss · www.schlumpf.swiss

Watch the position of the anchor pallets

The anchor pallets should have the same engagement in

each position. This may be regulated by adjusting the foot

screws. Only adjust the anchor pallets if necessary!

Adjusting the foot

Adjust the foot so the pendulum hangs straight and the

foot stands on the floor on all its screws.

The Time Machine is standing straight, when both pendu-

lum rods are positioned in the same distance to the wind-

ing spindle.

Summary of Contents for Time Machine TM3 Johann





