12
TABLE III
–
LED Function Displays (LEDs Lighted Continuously)
Control LED:
Continuous Illumination Indicates Normal Operation:
AC Power
AC power is present.
Pump Status
The float switch has been activated. The LED remains on (flashing) after the pump has
stopped. Depres
s the ‘SYSTEM TEST’ button to reset it.
Silenced Audible Alarm
Audible Alarm has been silenced. Press and release the ‘SILENCE ALARM’ button to reset
(activate) the audible alarm and turn OFF the LED.
Charging
Indicates that the battery is charging
–
see Table II, above.
Battery Status
A. Continuous ON - the battery voltage is above 10.9 Volts DC and capacity is above 20%.
B. Slow Beep/Slow LED Flash -
the battery’s capacity is below 20%, and voltage is
between 8.2VDC and 10.9VDC.
C. Fast Beep/Fast LED Flash - the battery has been discharged to less than 8.2VDC.
System Alert
Flashing (in unison with the buzzer) indicates that the charger has entered ‘Failure
Mode’. Press the ‘SYSTEM TEST’ and ‘SILENCE ALARM’ buttons to reset it.
NOTICE
: If the
source of the failure is not corrected, the charger will reenter “Failure Mode”. See
Table
IV for error code information.
