background image

 

FLOTECH Standard Warranty 

FLOTECH warrants all equipment referenced in this document which is manufactured by FLOTECH and bearing its name to be 
free from 
defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, 
extended,or limited warranty published by FLOTECH, FLOTECH will, for a period of twelve months from the date of sale, repair 
or replace any part of the equipment determined by FLOTECH to be defective. This warranty applies only when the equipment 
is installed, operated and maintained in accordance with FLOTECH written recommendations. 

 

This warranty does not cover, and FLOTECH shall not be liable for general wear and tear, or any malfunction, damage or wear 
caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, 
tampering, or substitution of non–FLOTECH component parts. Nor shall FLOTECH be liable for malfunction, damage or wear 
caused by the incompatibility of FLOTECH equipment with structures, accessories, equipment or materials not supplied by 
FLOTECH, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment 
or materials not supplied by FLOTECH. 

 

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized FLOTECH 
distributor for verification of the claimed defect. If the claimed defect is verified, FLOTECH will repair or replace free of charge 
any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the 
equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which 
charges may include the costs of parts, labor, and transportation. 

 

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING BUT 
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR 
PURPOSE

 

FLOTECH sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees 
that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to 
person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be 
brought within one (1) years of the date of sale. 

 

FLOTECH MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH 
ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD 
BUT NOT MANUFACTURED BY FLOTECH

These items sold, but not manufactured by FLOTECH (such as electric 

motors, switches, 
hose, etc.), are subject to the warranty, if any, of their manufacturer. FLOTECH will provide purchaser with reasonable 
assistance in making any claim for breach of these warranties. 
In no event will FLOTECH be liable for indirect, incidental, special or consequential damages resulting from FLOTECH 
supplying equipment 
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of 
contract, breach of warranty, the negligence of FLOTECH or otherwise. 

 

FLOTECH Information 

TO PLACE AN ORDER OR FOR SERVICE

contact your FLOTECH distributor, or call these numbers to identify 

the nearest 
distributor.

 

 

SPEEDO MARINE (PTE) LTD 

 

No.11 Tuas Link 2 Singapore 638559 
TEL: +65-68631998 FAX: +65-68631667 

 

E-mail : enquiry@speedo.com.sg 

 

http://www.speedo.com.sg

 

Summary of Contents for DK301-000












Reviews: