62 - Manual Runner DTM400i Treadmill
4. Use
Maintaining the sliding surface
Every 1 or 2 months (even if the treadmill is not in use) or every 50 hours of use, the
sliding surface under the running deck needs to be lubricated with the included
silicone lubricant. Make sure that the power is disconnected and loosen the
adjusting bolts of the rear roller. Lubricate the surface, distribute the silicone
lubricant evenly. When you are finished fastening the adjustment bolts of the rear
roller. Center the treadmill again as described on the next page
Cleaning
The metal and plastic parts of the product can be cleaned by using standard
cleaning products. However, make sure that all parts are completely dry before they
are used again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once
every six weeks. For fastening use the tool supplied with the product.
To prevent unnecessary wear, the product can only be used indoors and in a dry
environment.
3.7 Maintenance
Summary of Contents for Runner DTM400i
