40 - Manual Turner DHT125 Hometrainer
4. Use
Step 3
1.
Slide the oval cover (28) over the handlebar post (29). As displayed in fig. a.
2.
Connect the upper adjustment cable (74) with the lower adjustment cable (73)
as displayed in figure b-1. Pull the red plastic rotatable tube of the upper cable
back and downwards. The end of the red tube should be placed as displayed
within figure b-4. By rotating the read tube the minimum resistance can increased
or decreased. Rotate clockwise to decrease the resistance and rotate counter
clockwise to increase the resistance.
3.
Check if the cables are connected correctly by rotating the resistance knob. The
end of the upper cable (74) should increase or decrease tension in the lower
cable (73). Connect the upper (64) and lower (65) computer cable.
4.
Assemble the handlebar post (29) to the main frame (1) by fastening washers (13
and 72) and Allen bolts (20).
5.
Take the handle pulse cable (32) out of handlebar post through the holes in the
handlebar post as shown by the arrows in figure C
6.
Assemble the handlebar (36) to the handlebar post (29) by fastening the protective
cover (42), bushing (45), spring washer (44), flat washer (43) and knob (37).
1
Step-3
(x2)
D22*D8.5*1.5T
M8*1.25*15L
M8*1.25*15L
D16*D8.5*1.2T
72
20
C
64
65
45 44
37
43
42
13
13
72
28
29
28
(a)
20
20
(x2)
(x4)
(x4)
29
73
b-1
b-2
b-3
b-4
74
32
36
