flow-med dry-cap uv 2, Instruction Manual

2

EN  INSTRUCTION MANUAL

Dry&Clean Mode (2 h)

The 

Dry&Clean

 mode is an automatic program and combines 

fast drying with an efficient fan with UV-C light at the begin-

ning and end of the drying time for perfect hygiene.

Clean Mode (2 min)

The 

Clean

 Mode is a short-term hygiene program and starts 

the optimized UV-C light, which effectively eliminates up to 

99.9% of germs, bacteria and fungi present in the household.

Using first time 

1.  Plug the USB cable into a USB socket of the dual-port USB power supply and the round plug into the socket on the back  

of your dry-cap uv 2®. You can plug the USB cable of the charging station into the second USB socket.

2.  Then plug the power supply unit into a mains socket. 

i

The dry-cap uv 2® is ready to use

Operation        Dry&Clean Mode (2 h)

3.  Place the dry-cap uv 2® with the acrylic hood over the charging station with the rechargeable hearing aids.

4.  Press the left button (

Dry&Clean

 mode) and the care program ( UV-C) starts automatically.

•  The fast drying by fan is controlled by a microprocessor 

  and runs for 2 h 

i

LED permanent light

•  Ultraviolet light (253,7 nm) eliminates germs and bacteria 

  to 99.9% within 2 min 

i

LED blink light

•  After 2 min the UV-C light switch off automatically, 

  the drying process continues 

i

LED permanent light

•  Within the last minute of the 2 h drying program, 

  a second UV-C hygiene runs 

i

LED blink light

•  After 2 h the dry-cap uv 2® automatically shutdown to stand-by 

i

LED switch off

Drying and hygiene are complete, the charging of the hearing aids in the charging station continues and can  

  remain under the dry-cap uv 2® after the charging station is switched off.

5.  Lift the dry-cap uv 2® up and off next to the charging station. Remove the dried and hygienically cleansed hearing aids  

from your charging station.