background image

|

   10

 

QS301034  Rev. C

 

MN300610 Rev B_9 

10 of 10

 

WARRANTY 
 

Flowline warrants to the original purchaser of its products that such products will be free from defects in 
material and workmanship under normal use and service in accordance with instructions furnished by 
Flowline for a period of two years from the date of manufacture of such products. Flowline's obligation under 
this warranty is solely and exclusively limited to the repair or replacement, at Flowline's option, of the 
products or components, which Flowline's examination determines to its satisfaction to be defective in 
material or workmanship within the warranty period. Flowline must be notified pursuant to the instructions 
below of any claim under this warranty within thirty (30) days of any claimed lack of conformity of the product. 
Any product repaired under this warranty will be warranted only for the remainder of the original warranty 
period. Any product provided as a replacement under this warranty will be warranted for the full two years 
from the date of manufacture.

 

 
RETURNS 
 

Products cannot be returned to Flowline without Flowline's prior authorization. To return a product that is 
thought to be defective, go to flowline.com, and submit a customer return (MRA) request form and follow the 
instructions therein. All warranty and non-warranty product returns to Flowline must be shipped prepaid and 
insured. Flowline will not be responsible for any products lost or damaged in shipment.

 

 
LIMITATIONS 
 

This warranty does not apply to products which: 1) are beyond the warranty period or are products for which 
the original purchaser does not follow the warranty procedures outlined above; 2) have been subjected to 
electrical, mechanical or chemical damage due to improper, accidental or negligent use; 3) have been 
modified or altered; 4) anyone other than service personnel authorized by Flowline have attempted to repair; 
5) have been involved in accidents or natural disasters; or 6) are damaged during return shipment to Flowline. 
Flowline reserves the right to unilaterally waive this warranty and dispose of any product returned to Flowline 
where: 1) there is evidence of a potentially hazardous material present with the product; or 2) the product has 
remained unclaimed at Flowline for more than 30 days after Flowline has dutifully requested disposition. This 
warranty contains the sole express warranty made by Flowline in connection with its products. ALL IMPLIED 
WARRANTIES, INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The remedies of repair or 
replacement as stated above are the exclusive remedies for the breach of this warranty. IN NO EVENT SHALL 
FLOWLINE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING 
PERSONAL OR REAL PROPERTY OR FOR INJURY TO ANY PERSON. THIS WARRANTY CONSTITUTES 
THE FINAL, COMPLETE AND EXCLUSIVE STATEMENT OF WARRANTY TERMS AND NO PERSON IS 
AUTHORIZED TO MAKE ANY OTHER WARRANTIES OR REPRESENTATIONS ON BEHALF OF FLOWLINE. 
This warranty will be interpreted pursuant to the laws of the State of California. If any portion of this warranty 
is held to be invalid or unenforceable for any reason, such finding will not invalidate any other provision of this 
warranty. 

 

For complete product documentation and technical support, go to flowline.com. For phone support, call 562-
598-3015 from 8am to 5pm PST, Monday-Friday. Please have the Part and Serial number available.

 

 
 

Summary of Contents for Data loop











Reviews: