Adjust the position of all pipes and muffler to provide a satisfactory fit. A minimum 3/4” clearance
around all parts of the system must be maintained; while also keeping suspension travel and vibration
in mind.
Tighten all clamped connections down securely. Slide the 7/16” hanger keepers onto the end of the
hangers at the rear of the vehicle on the driver’s side to prevent the hangers from slipping out of the
rubber mounts. Use the included zip-tie to tie the rear axle breather tube up and away from the left
tailpipe to prevent damage.
For a more secure installation, we recommend welding all slip-fit connections.
PACKING LIST
Qty
Description
Part#
1
Inlet Pipe
26428S
1
Muffler
8530572-Z
1
Right Tailpipe
86195S
1
Left Tailpipe, Front Section
86194S
1
Left Tailpipe, Rear Section
86196S
2
Side Exit Pipe (R/L)
86197S
2
Rear Exit Pipes (R/L)
86206S
2
Stainless Tip
ST461
1
Parts kit
PK766
1
Frame Hanger
474HA
1
Back up plate w/bolt
475HA
1
Muffler Inlet Hanger
476HA
1
Inlet Pipe Hanger
459HA
5
2 1/2" clamp
MC250BS
1
3" clamp
MC300BS
1
Rubber hanger
HA168
1
3/8" Nut
HW103
1
3/8" lock washer
HW309
1
3/8” Flat Washer
HW303
2
7/16" Hanger Keepers
HW502
1
8½” Nylon Zip Tie
HW504
Pg 3 of 4
Technical Support (707) 544-4761
