© 2007 Flowmaster, Inc.
8)
Once the connector pipes are cut to proper length, raise them into position and connect them to the H-
Pipe and header collectors or manifold down pipes using a standard header flange, Flowmaster venturi
cone, or Flowmaster Ball Flange kit.
9)
Make any final adjustment to the position of the mufflers and pipes. Allow a minimum of
¾”
clearance
around all parts. Then tighten down all clamps securely and install the
7/16” push-on hanger keepers
on the round stock sticking through the rubber muffler hangers. Be sure to allow adequate clearance for
full suspension travel and vibration.
NOTE: WE HIGHLY RECOMMEND WELDING ALL SLIP-FIT CONNECTIONS.
Packing List
Qty.
Part # or Size
Part
BOX 1 OF 2 (5034)
2
953046
Muffler
BOX 2 OF 2 (1038)
1 26172
Connector Pipe, (L)
1 26173
Connector Pipe, (R)
1 26168
H- Pipe Assembly
1 26170
Left tailpipe
1 26171
Right tailpipe
1 PK419
Parts kit
1
287HA
Clamp Hanger Muffler (R)
1
288HA
Clamp Hanger Muffler (L)
1
308HA
Muffler Hanger Mount (L)
1
309HA
Muffler Hanger Mount (R)
1
310HA
Tailpipe Hanger Mount (L)
1
311HA
Tailpipe Hanger Mount (R)
1
244HA
Hanger
Mounting
Plate
4
HA168
Rubber Hanger
8
HW502
7/16” Hanger Keepers
4
MC300R
3” Ring Clamps
3
HW208
3/8”x 1” Bolt
5
HW303 3/8” Flat Washer
5
HW309
3/8”
Lock
Washer
5
HW103
3/8”
Nuts
Summary of Contents for DELTA FORCE 17382
Page 3: ...2007 Flowmaster Inc...