HWMA2 USER INSTRUCTIONS ENGLISH - 06/16
Page 19 of 39
5.2.5 Lubrication Table
Oil
Pure Oil Mist
Lubrication
Lubrication service
Type
Mineral Oil
(Petroleum Based)
Ambient temperature
°C (°F)
-5 to 60
(23 to 140)
Oil temperature range*
°C (°F)
15 and above
(59 and above)
Viscosity
mm²/s 40°C [cSt]
100
First Oil Change
200 hours
Further Oil Changes
2000 hours or at least every
6 months
Designation according to
DIN51502 ISO VG
100
BP
-
CASTROL
-
OMV
-
Aral
-
Esso
-
LSC
(for oil mist)
LSO 100
Synthetic oil
Mobil
-
Shell
-
Texaco
-
Total
-
Wintershall
(BASF Group)
-
** For ambient temperature from -12°C (10 °F) upwards
* Note that it normally takes 2 hours for bearing temperature stabilize and the final temperature will depend on the ambient, r/min, pumpage temperature and pump size.
Viscosity index shall be at least 95.
C
e
n
tr
if
u
g
a
l P
u
m
p
L
u
b
ri
c
a
ti
o
n
Ball bearing
Mineral Oil
(Petroleum Based)
-20 to 35
(-4 to 95)
-5 to 65
(23 to 149)
32
2000 hours or at least every
6 months
35 to 60
(95 to 140)
up to 85
(up to 185)
up to 100
(up to 212)
Aral Vitam GF 32
NUTO H32
BP Energol HL46
BP Energol HLP46
Perfecto T46**
Azolla ZS32
LSO 46
Synthetic oil
Rando HD 32
Shell Tellus 46
Shell Turbo T46**
Rando HD 46
Wiolan HN32
Wiolan HS32
46
200 hours
2000 hours or at least every
6 months
46
LSO 32
Synthetic oil
Mobil Nuto H32
Mobil DTE13M
Mobil DTE24
Shell Tellus 32
Shell Turbo T32**
68
200 hours
2000 hours or at least every
6 months
68
Aral Vitam GF 68
Mobil Nuto H46
Mobil DTE15M
Mobil DTE25
Aral Vitam GF 46
NUTO H46
Oil Bath and Purge Oil Mist Lubrication
BP Energol HL68
BP Energol HLP68
Perfecto T68
OMV turb HTU 68
32
BP Energol HL32
BP Energol HLP32
Perfecto T32**
OMV turb HTU 32**
200 hours
OMV turb HTU 46**
O
il
C
o
m
p
a
n
ie
s
a
n
d
L
u
b
ri
c
a
n
ts
Shell Tellus 68
Shell Turbo T68
Rando HD 68
Azolla ZS68
Wiolan HN68
Wiolan HS68
NUTO H68
LSO 68
Synthetic oil
Mobil Nuto H68
Mobil DTE16M
Mobil DTE26
Azolla ZS46
Wiolan HN46
Wiolan HS46
For temperatures below -5 °C (-23 °F) use lubrication oil class SAE 5W-50 or API-SJ.
Seal System / Pumped Liquid
Quench-Oil
General Features
Barrier/Buffer Fluid for
Mech. Seal
Tandem Seal to -40 °C (-40 °F)
Back to back Seal with gascoffer-dam
Conventional back to back Seal
- Raffinated Hydraulic Oil
- Synthetic Oil
- Mixture of water / glykol
ATTENTION
:
Do not use Methanol
appr. 10-15 cST at 40°C
(104 °F)
below -40°C (-40 °F)
Pourpoint vaporization
above 80°C (176 °F)
Tandem Seal to -60°C (-76 °F)
Ethanol/Propanol
The sequence of the suppliers of the lubricants does not represent any indication of their superiority.
¹ Viscosity at 40 °C (104 °F) in cSt [mm²/s] DIN 51562
