C MONSOON 2.5
OPERATION GUIDE
FZVACF-2.5
© WESSOL, LLC 2022
ASSEMBLY
PART A: ASSEMBLING YOUR NEW SPRAYER
1.
Remove the nuts and
bolts, holsters (4), and
nozzles (12, 13, 14) from the
tank strainer (3). Set aside.
2.
Place a wheel (15) on
the axel connected to
the tank. Slide a cotter
pin through the hole
in the axel. Gently pry
the cotter pin open to
secure the wheel on
to the axel. Repeat
for the other wheel.
3. Next, place the top wand
holster at the protruding
holster mount on the
sprayer
tank.
While
holding the holster in
place, insert a nut on one
side of the hexagonal slot
and screw the bolt through
the other side using a
Philip’s head screwdriver
until the bolt fastens
into the nut. Repeat for
the bottom holster/slot.
4.
Stand the sprayer upright
and loosen the knobs
(without removing them
completely)
on
both
sides where the handle
(16) will be inserted.
1.
2.
3.
4.
8
