Fully charge the battery prior to first operation.
NOTE:
The flashing green light on charger indicates that
battery is charging when all lights stop flashing, the
battery is fully charged.
Fill the tank with pre-prepared liquid through
the intake filter and securely tighten the
tank cap.
NOTE:
Always mix liquid solution in a separate
container.
Determine which nozzle is right for the job
& connect to spray wand by pulling down on
quick-connect and inserting nozzle.
a) Adjustable nozzle
= ranges from jet stream to
conical stream
b) Fan nozzle
= flat 25º stream
c) Jet nozzle
= narrow stream
Turn pump on by twisting the dial to the desired
amount of pressure.
Begin spraying by squeezing spray trigger.
1.
Preparing to spray:
STEP 2.
2.
3.
4.
5.
1.
2.
3.
4.
5.
a)
b)
c)
Copyright © WESSOL, LLC
4
