STORM 2.5
OPERATION GUIDE
FZVAAG-2.5
© WESSOL, LLC 2021
- 9 -
GETTING STARTED
Preparing to spray
1. Fully charge the battery prior to
the first operation.
Note: the indicator lights will flash green
while charging. Solid green lights mean
the battery is fully charged.
2.
In a separate container, prepare
the solution you wish to spray
according to the manufacturer’s
instructions. Open the tank lid
and carefully pour the solution
through
the
tank
strainer.
Securely tighten the tank lid.
3. Determine the nozzle you want to
use (see right) and insert it into the
spray wand or spray gun by pulling
back on the collar of the quick-
connect fitting. Remember to
push the collar back into position.
a) Adjustable cone nozzle: ranges
from jet stream to conical mist.
b) Green fan nozzle: flat 25˚ fan
c) Red jet nozzle: 0˚ narrow stream
4. Begin spraying by squeezing the
spray trigger.