Fully charge the battery prior to first operation.
NOTE:
The flashing lights on charger indicates that
battery is charging when all lights stop flashing, the
battery is fully charged.
Fill the tank with pre-prepared liquid through
the intake filter and securely tighten the
tank cap.
NOTE:
Always mix liquid solution in a separate
container.
Determine which nozzle is right for the job
& connect to spray wand by pulling down on
quick-connect and inserting nozzle.
a) Adjustable nozzle
= ranges from jet stream to
conical stream
b) Fan nozzle
= flat 25º stream
c) Jet nozzle
= narrow stream
Turn pump on by rotating the pressure knob on
the side of the tank until you reach the desired
pressure output.
Begin spraying by squeezing spray trigger.
1.
Preparing to spray:
STEP 2.
2.
3.
4.
5.
1.
2.
3.
4.
5.
a)
b)
c)
4
Copyright © WESSOL, LLC
