13
Step 3:
Attaching the Bidet
Quick-Release Button
A.
Remove template and place the bidet
(A)
onto the bowl,
aligning the channel under the bidet base with the
mounting plate.
B.
With the lid and the seat in the up position, slide the base of
the bidet back onto the mounting plate until you hear a “click.”
C.
Double check that the bidet is secure and aligned to your
desired placement. If adjustment is needed, remove the bidet
by pressing the quick-release button on the right side of the
base and sliding the bidet off the toilet.
If you don’t hear an audible “click,” make sure that the
screws are flush with the mounting plate and that the sliding
rails were installed correctly. See Step 1D on page 11.
Channel
Proper alignment is easiest
to see while at eye-level
with the mounting plate.
Pull
ONLY
from the base.
DO NOT
pull the seat or lid, as this
could damage the unit.
Return to Step 2A on page 12 to find proper placement.
NOTICE
(A)
Summary of Contents for soft spa 9500
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
