Fluidmaster soft spa 9500, Installation Instructions Manual

7

CAUTIONS BEFORE INSTALLATION

This product is for use on a normal 120 V circuit and has a grounding plug that looks like the plug illustrated in sketch (A) in Figure 1. A 
temporary adapter, which looks like the adapter illustrated in sketches (B) and (C), may be used to connect this plug to a 2-pole receptacle 
as shown in sketch (B) if a properly grounded outlet is not available. The temporary adapter should be plugged into a properly grounded 
outlet (sketch A) and should be installed by a licensed electrician. The green colored rigid ear, lug, and the ike extending from the adapter 
must be connected to a permanent ground such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in place by the screw.

WARNING: 

If  you  do  not  understand  the  instructions  or  are  unclear  on  how  to  properly  follow  grounding  instructions,  do                                                                                                     

           not attempt installation and call a qualified service professional.

GROUNDING PIN

ADAPTER

ADAPTER

METAL SCREW

TAB for
Grounding Screw

GROUNDED
OUTLET

GROUNDED
OUTLET BOX

(A)

(B)

(C)

PREFERRED CONNECTION

TEMPORARY CONNECTION

CAUTION: 

The use of an extension cord is not recommended or advised. Consult a licensed electrician if you are not sure  

            whether the unit is properly grounded.

Remote control power: 

AAA (1.5V), 2 EA.

GROUNDING INSTRUCTIONS

This product should be connected to a grounded, metallic, permanent wiring system, or an equipment-grounding conducer should be run 
with the circuit conductors and connected to the equipment grounding terminal or lead on the product.

SUGGESTIONS ON POWER LINE AND WATER SUPPLY CONNECTION

250mm

100mm

200mm

500mm

NOTE:

 In the same room where this product is 

installed, it is necessary to install a water-stop 
terminal in an accessible position, otherwise 
the unexpected failure of this product may 
result in loss of user.

The power socket can be installed on either left 
or right of the water line.

*This product is suitable for AC120V/60HZ power supply. In order to ensure safe use,
   the socket and its connecting wires must be able to withstand more than 15A current.