9
Return Line Water Flow
IMPORTANT
performance. It may cause the cleaner to steer away from the end of the pool where the return line is located, or it may
best in your pool:
vacuuming up debris in its path.
MAINTENANCE
•
The turbine is moving freely and is not obstructed by debris. See
“Removing Debris from the Turbine” below.
Figure 18
on the next page.
We recommend that you leave the cleaner in your pool, except
during chemical shock treatments.
• During
swimming it is easy to unplug the cleaner and pull it to
one side.
•
Note:
When storing the cleaner, do not coil the hose. Lay the
performance. Should replacement be required, insist on genuine
Pentair cleaner hose.
Removing Debris from the Turbine
and disconnect the cleaner from the leader hose.
2. Check to see if anything is clogged inside the cleaner. Do this by
to rotate the right side wheel forward. If the wheel rotates
front of the cleaner by pulling it out and down.
This will separate the top cover from the cleaner body and you
body (see
Figure 15
). Set the cover aside.
Note:
Top Cover
Right Side
Wheel
Buckle
Swivel
Assembly
Removal of Top Cover
Figure 15
Turbine
Cover
Figure 16
the turbine cover aside. See
Figure 16.