Power Logger
Standard and Optional Accessories
3
•
Maintenance work must be done only by qualified
service personnel.
•
Use only specified current probes. If you use
flexible current probes, wear suitable protective
gloves or work on de-energized conductors.
•
Protect the Logger against wetness and humidity.
•
To prevent electrical shock, always connect
voltage and current test leads to the Logger before
connecting to the load.
•
The plug and socket connection for the voltage
lead set is designed for 600 V CAT III. The
maximum voltage between outer conductor and
earth potential must not exceed 600 V. With multi-
phase connections, phase-phase voltage may not
exceed 800 V.
•
Use only the provided original or specified
accessories. This includes the ac power adapter.
Adequate qualifications are the following:
•
Trained and authorized to switch on/off, ground (earth) and mark
power distribution circuits and devices in accordance with the safety
standards of electrical engineering.
•
Training or instruction in accordance with the standards of the safety
engineering in maintenance and use of appropriate safety equipment.
•
Training in first aid.
Standard and Optional Accessories
The standard equipment for the Power Logger is listed in Table 2. Optional
accessories are listed in Table 3.
Summary of Contents for 1735
Page 12: ...1735 Users Manual iv ...
Page 14: ...1735 Users Manual vi ...
Page 16: ...1735 Users Manual viii ...
Page 84: ...1735 Users Manual 68 ...
