• Auto-Power-Off function
• Backlight
• Additional lighting function when working under bad lighting conditions
• Additional transmitters are available to extend or distinguish several signals
Scope of supply
1 pc. FLUKE Cable Locator Transmitter
1 pc. FLUKE Cable Locator Receiver
4 pc. Test Leads
1 pc. Battery 9 V, IEC 6LR61
6 pc. Batteries 1,5V, IEC LR6
2 pc. Cocodile Clamps
2 pc. Test Probes
1 pc. Carrying Case
1 pc. Users Manual
Transport and Storage
Please keep the original packaging for later transport, e.g. for calibration. Any transport damage
due to faulty packaging will be excluded from warranty claims. In order to avoid instrument damage,
it is advised to remove batteries when not using the instrument over a certain time period. However,
should the instrument be contaminated by leaking battery cells, you are kindly requested to return it
to the factory for cleaning and inspection. Instruments must be stored in dry and closed areas. In the
case of an instrument being transported in extreme temperatures, a recovery time of minimum 2
hours is required prior to instrument operation.
Safety Measures
The FLUKE Cable Locator has been constructed in accordance with the safety regulations for elect-
ronic test and measurement instruments and has left the factory in safe and perfect condition. To
maintain this condition, the user must pay attention to the safety references contained in this Users
Manual. This Users Manual contains information and warnings necessary for safe operation and
maintenance of the instrument.
The respective accident prevention regulations established by the associations for electrical
systems and equipment must be strictly met at all times.
In order to avoid electrical shock, the valid safety and VDE regulations regarding excessive con-
tact voltages must receive utmost attention, when working with voltages exceeding 120V (60V)
DC or 50V (25V)rms AC. The values in brackets are valid for limited ranges (as for example me-
dicine and agriculture).
Measurements in dangerous proximity of electrical installations are only to be executed when
instructed by a responsible electrical specialist, and never alone.
5
Fluke 2042
Safety Measures
