Distance Meter
Functions
15
Press to stop continuous measurement. The
values for maximum and minimum distances are shown in
the display as well as the last measured value in the
summary line.
Functions
Addition / subtraction
Distance measuring
The next measurement is added to the previous one.
The next measurement is subtracted from the
previous one.
This process can be repeated as required.
Press
this key to display result. The result is always shown in
the summary line with the previous value in the second
line.
The last step is cancelled.
Area
Press
once
. The
symbol appears in the display.
Press this button to take the first length
measurement (for example, length).
Press it again to take the second length
measurement (for example, width).
The result is displayed in the summary line.
Press the
button (
long
press)
to calculate the
circumference.
Volume
Press this button
twice
. The
symbol appears in the
display.
Press this button to take the first length
measurement (for example, length).
Press this button to take the second length
measurement (for example, width).
Press this button to take the third length
measurement (for example, height). The value is shown
in the second line.
The volume then appears in the summary line.
Press the
button (
long
press)
to display additional
room information such as ceiling/floor area, surface area
of the walls, circumference.
Ceiling/floor area
Wall area
Circumference