background image

PN 4579835 November 2014, Rev. 1 8/2015

2014-2015 Fluke Corporation

All product names are trademarks of their respective companies.

DSX-CHA003S

Coaxial Cable Adapters

Users Guide

The DSX-CHA003 coaxial adapters let you use the DSX CableAnalyzer

 to certify 

coaxial cabling for network and video applications.

The coaxial cabling kit has these items:

Two DSX-CHA003 adapters

Two female to female F-connector adapters

Two F-connector female to BNC female adapters

One 12 inch (30 cm) 75 



coaxial patch cord with male F-connectors

Safety Information

Warning

To prevent possible fire, electric shock, or personal injury, read the 
safety information in the documentation supplied with the modules 
and the Versiv

 units before you use the tester.

Caution

To prevent damage to the tester, adapters, and cables under test, to 
prevent data loss, and to make sure your test results are as accurate 
as possible, set the reference for coaxial cable before you use the 
coaxial adapters for the first time, and approximately every thirty 
days after that.

99 Washington Street 
Melrose, MA 02176 

Phone

 781-665-

1400

Toll Free 1-800-517-8431

Visit us at www.T

estEquipmentDepot.com

Summary of Contents for DSX-CHA003S







Reviews: