background image

6

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from defects in material and 
workmanship for one year from the date of purchase, unless stated otherwise herein. 
Parts, accessories, product repairs and services are warranted for 90 days, unless 
otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries, cables or other peripherals are 
all considered parts or accessories. This warranty does not cover damage from 
accident, neglect, misuse, alteration, contamination, or abnormal conditions of 
operation or handling. Resellers are not authorized to extend any other warranty 
on Fluke Networks’ behalf. To obtain service during the warranty period, contact 
your nearest Fluke Networks authorized service center to obtain return 
authorization information, then send your defective product to that Service Center 
with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS 
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE 
NETWORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. 
Since some states or countries do not allow the exclusion or limitation of an implied 
warranty or of incidental or consequential damages, this limitation of liability may 
not apply to you.
4/15

99 Washington Street 
Melrose, MA 02176 

Phone

 781-665-

1400

Toll Free 1-800-517-8431

Visit us at www.T

estEquipmentDepot.com

Summary of Contents for DSX-CHA003S







Reviews: