Fluke i400s Calibration Information Manual Download

Page: 1 / 8

2414327

February 2005

i400s

AC Current Clamp

Calibration Information

Introduction

Warning

To avoid electric shock or injury, do not perform the performance tests or

calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel

only.

The

i400s Calibration Information

provides the information necessary to verify the performance and

adjust the calibration of the Fluke i400s AC Current Clamp, hereafter known as the Current Clamp.

The following information is included in this document:

•

Safety Information and Electrical Symbols

•

Specifications

•

Maintenance

•

Performance Tests

•

Calibration Adjustment

•

User-Replaceable Parts

•

Warranty Statement

See the

i400s Instruction Sheet

for complete operating instructions.

www.

.com

information@itm.com

1.800.561.8187

Summary of Contents for i400s









Search results

Summary of Contents for i400s

Reviews:

Related manuals for i400s

Brands by name

Popular brands

Fluke i400s, Calibration Information Manual

Search results

Summary of Contents for i400s

Reviews:

Related manuals for i400s

Brands by name

Popular brands