XS, XST
Users Manual
12
Table 5. Display Screen Features and Controls--Review Image Mode
Number Description
A
Center Point Temperature—Shows the average temperature in
degrees Fahrenheit of four central pixels (XST model only).
B
Center Point—Includes the center 2 X 2 pixels (XST model only).
C
Date—Indicates the year, month, day, and day of the week an
image was captured.
D
Time—Indicates the time (24-hour clock) an image was captured.
E
Saved Image ID Numbers—Indicates the identification number of
the saved image you are reviewing and the total number of saved
images in the camera memory.
Using Display Screen Menus
Your camera is user-friendly and easy to operate using the Frame Capture
Trigger to access and navigate through display screen menus.
To access the main menu, start the Camera while simultaneously pulling and
holding the Frame Capture Trigger.
From the main menu, pull and release the Frame Capture Trigger to advance
through the list of menu options until you reach the desired function. Release
the Frame Capture Trigger for 4 seconds to select the desired function; a
4-second countdown appears on the display screen.
Menu Options
Highlight “Run Normally” and release the Frame Capture Trigger for 4
seconds to access Scan Target mode. See
Acquiring and Reviewing Images
later in this manual.
Highlight “Change Palette” and release the Frame Capture Trigger for 4
seconds to access a submenu listing 10 palette options. The palette bar for the
palette chosen is shown on the right of the Camera display screen. See
Changing Color Palettes
later in this manual.
