XS, XST
Users Manual
20
3.
Configure SmartView to use the proper communications port:
•
Click “Edit” on the SmartView Menu Bar, then click
“Preferences…,” then click the InSight Settings tab.
•
Select the appropriate default communications port and click
“OK.”
Note
The following instructions are for Microsoft Windows XP. If you are
using a different version, check the users manual that came with your
Windows operating system.
•
If you are unsure which communications port to select, access the
PC device manager on the PC desktop. Right click on the “My
Computer” icon and select “Properties.” Go to the “Hardware”
tab and select “Device Manager.” A “Device Manager” window
will appear. Left click on the “+” sign next to the word “Ports.”
The actual port number may depend on the devices currently in
use on the PC.
•
When prompted to use these settings in future sessions, select
“Yes”.
4.
Toggle the ON/OFF switch to the right to power the camera on.
•
If the Camera clock and calendar do not match within 10 minutes
of the PC clock and calendar, a pop-up window appears asking if
you want to set the Camera clock to match the PC. If you select
“Yes,” the Camera time and calendar change to match the PC. If
you select “No,” the Camera time and calendar remain
unchanged.
5.
The Camera is now connected to the PC and ready to download
images. See procedure under
Downloading Images to Computer
later
in this manual.
Using a USB Port Connection
To connect the Camera to a PC using the USB port:
1.
Connect the RS-232/USB cable to the USB communications port on
the PC. Do not power on the Camera.
