Ti10, Ti25, TiR and TiR1
Users Manual
12
Listening to Voice Annotations (Ti25 and TiR1
Only)
To play the voice annotation already stored with an image on the SD card:
1.
Perform the steps in the “Reviewing and Deleting Stored Images” section
to bring the desired image to the Imager’s display.
2.
Press the softkey labeled
Select
.
3.
Press the softkey labeled
Audio
.
4.
Press the softkey labeled
Review
.
The saved voice annotation will be replayed through the Imager’s speaker.
Changing the Temperature Units
The Imager will display temperature in Fahrenheit or Celsius. To change the
temperature units:
1.
Press
a
until
Units
is displayed over
d
.
2.
Press the softkey labeled
Units
.
3.
Press
c
for Celsius or
d
for Fahrenheit.
4.
Press the softkey labeled
Back/Done
to set the language.
Enabling/Disabling Spot Indicators (Ti25 and
TiR1 Only)
To enable or disable the hot and cold spot indicators:
1.
Press
a
until
Spot Temp
appears over
d
.
2.
Press the softkey labeled
Spot Temp
.
3.
Press the softkey labeled
Off
to turn the hot spot indicators off or press the
softkey labeled
On
to turn them on.
4.
Press the softkey labeled
Back/Done
to accept the setting.
Making Accurate Temperature Measurements
All objects radiate infrared energy. The amount of energy radiated is based on
two primary factors: the surface temperature of the object and the emissivity of