ThermoView® Series
Users Manual
16
7.1.5. Ethernet cable, 80°C max., 25m (80ft.), (A-CB-LT-M12-W08-25)
Please see under 7.1.4, Ethernet cable, 80°C max., 7.5m (25ft.), (A-CB-LT-M12-W08-07).
Just the supplied cable length differs and is 25m (80ft.) instead of 7.5m (25ft.).
7.1.6. Ethernet cable, 80°C max., 50m (160ft.), (A-CB-LT-M12-W08-50)
Please see under 7.1.4, Ethernet cable, 80°C max., 7.5m (25ft.), (A-CB-LT-M12-W08-07).
Just the supplied cable length differs and is 50m (160ft.) instead of 7.5m (25ft.).
7.1.7. PoE Injector (Standard), 115/230VAC, (A-TV-POE1)
The A-TV-POE1 is a single port, high-power solution for remote powering of current and
emerging high-power applications. The device generates up to 30W and enables remote power
for a new range of applications. It complies with the IEEE 802.3at PoE+ standard and is
backward compatible with IEEE802.3af. It can power both existing 10/100Base-T network
devices and emerging wireless 1000Base-T devices such as wireless IEEE 802.11ac access
points and IP Cameras.
1
Figure 14: Standard PoE Injektor to conform to office environments
Features:
•
Single-port Gigabit PoE Midspan, 802.3at Compliant with 2-event classification
•
Backwards compatible with IEEE802.3af
•
30W output power from -20ºC to +40ºC, 25W output at +55ºC
•
1000Base-T compatible
•
Safe & reliable power over existing Ethernet infrastructure
•
Automatic detection and protection of non-standard devices
•
Plug-and-play installation
•
Guaranteed up-time
1
Copyright Microsemi
®
