background image

IMPORTANT SAFETY INSTRUCTIONS

 

WARNING

 - To guard against injury, basic safety precautions should be observed, including the following: 

1. 

READ AND FOLLOW ALL SAFETY 

INSTRUCTIONS.

2. 

DANGER

 – To avoid possible electrical shock, special care should be taken since water is employed in the use 

of aquarium equipment.

3.  Never attempt to repair this appliance yourself. Return the appliance to an authorized service facility for 

service or discard the appliance. Do not operate the appliance if it has a damaged cord or plug. If cord is 
damaged, the appliance should be destroyed.
A.  If the appliance falls into the water, 

DO NOT

 reach for it. First unplug the appliance and then retrieve 

it from the water. If electrical components of the appliance get wet, unplug it immediately and allow 
the appliance to thoroughly dry. Carefully examine the appliance after installation. It should not be 
plugged in if water is present on parts not intended to be wet.

B.  To avoid the possibility of the appliance plug getting wet, position the tank to 

the side of a wall mounted receptacle to prevent water from dripping onto the 
receptacle. A “drip loop”, should be arranged by the user for each cord connecting 
an aquarium device to the receptacle. The “drip loop” is the part of the cord 
below the level of the receptacle or the connector if an extension cord is in use, to 
prevent the water from travelling along the cord and coming into contact with the 
receptacle. If plug or receptacle gets wet, 

DO NOT

 un-plug the cord. Disconnect 

the fuse or circuit breaker that supplies power to the receptacle then unplug the 
transformer and examine for the presence of water in the receptacle.

4. 

WARNING

 - This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. Children should be supervised to ensure that they do not play with the appliance.

5.  Always unplug the appliance from the outlet when not in use, before putting on or taking off parts and 

before cleaning. Never yank the cord to pull the plug from the outlet. 

6.  Do not use this appliance for any purpose other than that recommended by the manufacturer. The use of 

attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.

7.  Do not install or store the appliance where it will be exposed to weather or temperatures below freezing.
8.  Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating 

the appliance.

9.  Read and observe all important safety notices on the appliance.
10.  If an extension cord is necessary, a cord with the proper current (amps) rating should be used. A cord 

rated for fewer amps than the appliance rating may overheat. Care should be taken to arrange the cord 
so that it will not be tripped over or pulled.

11.  This appliance is intended 

FOR INDOOR HOUSEHOLD USE ONLY.

 

12.  This appliance is for use with salt water only. Not for Freshwater use.
13. 

(For North America only)

 This appliance has a polarized plug (one blade is wider than the other). As a 

safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the 
outlet, reverse the plug. If the plug will still not fit fully into the outlet, contact a qualified electrician to 
inspect the outlet and make the needed alterations. Never use with an extension cord unless the plug can 
be fully inserted. Do not attempt to defeat this safety feature.

SAVE THESE INSTRUCTIONS

Summary of Contents for SEA EVO












Reviews: