3 ELIOS System description
ELIOS USER MANUAL
Page 16 of 38
Connect to the controller charger to charge the internal battery of the controller. The battery can be
charged during flight.
Controller Pairing
Every drone is paired to its own GCS controller, if you wish to pair a drone to another GCS controller then you
must first perform this pairing procure.
Using the Cockpit App
Remove the screw located on the back of the transmitter block of the drone.
Place the controller and Elios at 1.5 m from each other.
Turn on Elios and the controller with the tablet connected.
Open Elios Cockpit and go to Settings > Pairing and tap on START.
The Controller Status Indicator will blink blue and emit a beep sound when the Controller is ready to
link.
Using the Sim card remover provided in the Tool kit (or a paperclip), press the link button on the
transmitter block on Elios. The controller status indicator will glow solid green and stop beeping if the
linkage is successful.
Put back the screw.
Using only the Controller unit
The process can also be performed without using the tablet and the Cockpit App by following all the
steps above, except that instead of step 4 you simultaneously press and hold the FN button, the Pro
Mode button, and the Camera home button. The controller will start beeping.
