Flycam Buddy - 2 Axis Gimbal Camera Stabilizer (FLCM-BDY) 3
Now attach 35cm rods (without cut) with jointers
and tighten with Allen bolts.
Then attach the 41cm long rod with the jointer as shown and Join another jointer to the top of this
41cm long rod.
Loosen the Allen bolts with provided Allen key from
both jointers.
Attach the other 28cm long rods (having cut) with the jointer and tighten it well with Allen key.
The Gimbal Stand is ready for use now.
NOTE:
Keep the cuts upper side on rods
A s s e m b l i n g S t e p s o f G i m b a l S t a n d
