5
HEAD ASSEMBLY
Head Plate
Mid Plate
Bottom Plate
These three individual pieces are shipped as one assembled unit.
‘V’ SHAPED ADAPTORS INCLUDED IN HARDWARE KIT
Note:
Included in the hardware package are two differ-
ent sized V-shaped adaptors used to attach the cam-
era to the head plate. Choose the one that is suitable
for your camera. A locking pin located at the front of
the adaptor prevents camera rotation on the head.
Note:
The threaded stud is located in the center of the
base plate for attach it with central post.
The bottom of the interior central post has a threaded
slot that matches the pin located mid base on the
platform. To attach the two, simply thread them
together and tighten to ensure a slip free connection.
Alignment should end up with the central post being
perpendicular to the base platform. This will make
camera balancing and operation much easier.
Head Plate
Bottom Plate
Mid Plate
CENTRAL POST
Warning:
The Gimbaled control unit, handle and yoke
have been factory set for optimum performance.
Do not attempt to adjust them.
ATTACHING CENTRAL POST TO BASE PLATFORM
