7
Horizontal adjustment on the base platform is made by loosening the retaining screws and
moving the mounted cups closer to or further away from the stalk and then retightening.
You will probably need to adjust and re adjust the horizontal position to achieve optimum
performance.
Secure the counter weight plate by
using the black thumb nuts to prevent
weight movement.
NOTE:
Remember to leave at least 1” of the
telescoping
post showing below the
telescoping
clamp.
The easiest way to correctly align the
parts is loosen the screw on the top
part of telescoping clamp, using allen
wrench, until you can rotate the parts
so they are correctly aligned. Then
simply re-tighten the screw.
