USB Power Plug
connection
The toy should be periodically examined
for potential hazardous parts to be repaired or replaced.
Control Buttons
Paper Holder
On/Off Switch (back)
*Battery Compartment (bottom)
Adjustable
Focus
Stability Legs
LED Indicators
Activity Cartridge
Slot
Activity Cartridge
Storage Compartment
CAUTION-
ELECTRIC TOY:
Not recommended for children under 3 years of ages.
As with all electric products, precautions should be
observed during handling and use to prevent electric shock.
AC adapter: INPUT:100-240VAC, 0.3A MAX 50/60Hz;
OUTPUT: 5.9V 1.0A
1. Separate the projector head from the base unit.
2. Insert the head unit into the top of the base unit until you hear a click.
3. Plug the USB Power Cable (included) into the back of the unit and into a USB power
outlet (5V DC, minimum 1.2A). If you wish to use batteries instead, insert four D batteries
(not included) according to the directions provided. When using batteries, it is recommended
to enable "efficiency mode" by pressing the blue circle button for 2 seconds (see image).
4. Pull out the blue legs to stabilize the projector and create a paper holder.
5. Flip the Power Switch on the back to turn on the projector.
6. Insert the pre-loaded Activity Cartridge into the top of the projector.
7. After 10 minutes with no activity the projector light will
automatically turn off. Reactivate the light by using the buttons
in the app or on the projector.
For more fun, additional Activity Cartridges and accessories are available at:
https://www.flycatcher.toys/smart-sketcher-2
2s
SIMPLE SET UP
SIMPLE SET UP
USER M
ANUAL
USER M
ANUAL
Please retain this user manual for future reference
