1. Download the “smART sketcher Projector” app on your mobile device or tablet.
Open and enable permission for access to camera and photos.
2. Turn on your Bluetooth and connect to the projector by clicking on the
“connect” button at the top right of your screen.
3. Choose your mode of play: Learn to Draw (pre-loaded activity card), or Trace Pictures
(taken from your own device).
4. Trace Pictures:
- Select an image from your photos or take your own using the
in-app camera.
- Select a filter.
- Drag finger across screen to adjust darkness.
- Press the checkmark to transfer image to the smART
sketcher™ Projector.
- Begin tracing on paper.
5. Learn to Draw:
- Insert the preloaded activity card or a smART sketcher
Creativity Pack (purchased separately) into the top
of the projector.
- The title will appear under Learn to Draw icon in the app.
- Tap the icon to preview the loaded content.
- Scroll to find the picture you wish to draw and select it.
- Adjust your settings using either the icons on the app or the
buttons on the projector.
- Image will be projected onto your paper. Begin drawing!
For more detailed instructions, please visit www.smartsketcher.com
Go to Home / Animate
Go Back a Step
Go Forward a Step
Previous Drawing
Repeat Last Step/AutoPlay
Next Drawing
In exceptional circumstances batteries may leak fluids that
can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
To insert or change the batteries, twist the
screw counter-clockwise to loosen. Remove old
batteries and in sert 4 D batteries with the
correct polarity. Replace the screw and twist
clockwise to close.
Transformers / charger used with the toy are to be
regularly examined for damage to the cord, plug,
enclosure and other parts, and that, in the event of
such damage, the toy must not be used with this
transformer/charger until the damage has been
repaired.
The toy is not intended for children under 3 years old;
This device complies with Part 15 of the FCC
Rules and Industry Canada’s license-exempt
RSSs. Operation is subject to the following
two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this
unit expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
1)
2)
3)
4)
The toy shall only be used with a transformer for toys
The model number
A122-0602000E/A122-0602000B/A122-0602000J/
A122-0602000U or specification of Input Voltage:
AC 100-240V 50-60 Hz, Output Voltage: DC 6V, 2A,
transformer for use with the toy
The transformer is not a toy;
Toys liable to be cleaned with liquid are to be
disconnected from the transformer
before cleaning.
Non-rechargeable batteries are to be removed from the
product before being charged.
Rechargeable batteries are only to be charged under adult
supervision.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
Do not mix old and new batteries.
Only batteries of the same or equivalent types as
recommended to be used.
Batteries are to be inserted with correct polarity.
Exhausted batteries are to be removed from the product.
The supply terminals are not to be short circuited.
Dispose of battery(ies) safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
BATTERY INSTALLATION
AC ADAPTER:
RADIO STATEMENT
BATTERY SAFETY INFORMATION
For more detailed instructions,
questions or problems, please
visit www.smartsketcher.com.
smART sketcher™ is a
trademark of Flycatcher Inc.
Copyright © 2017
Flycatcher Inc.
All rights reserved.
Visit us at:
www.smARTsketcher.com
Requires Android 5.0+
Requires Apple iOS 8.0+
CONTROL BUTTONS
CONTROL BUTTONS
SAFETY INFORMATION
SAFETY INFORMATION
QUICK START
QUICK START
FCM
-IM
-07-01 r
ev
. C
Summary of Contents for smart sketcher
Page 1: ......
