FLYINGVOICE
Page 33 of 86
stands lower case,
EN
stands capital letter, and
num
stands digit
Step 4.Press the
ok softkey button
to input
receivers’ phone number
.
Note
: FIP11/FIP11W/FIP11WL support group mails, user can send one message to 10 friends or family one a time;
Press the
ok softkey button
to access to configuration the next receiver’s phone number;
You can select one number in phonebook by pressing the
pbook softkey button.
If user has configuration the phone numbers which you want to send, press the
ok softkey button
twice to access to the next
item (
Sender number)
.
Step 5.Set Sender phone number, default is line1’s phone number.
Step 6.Press the
select softkey button
to start sending message.
5.14.2 Reading Message
Step 1.Press
button, and then choose
4Text Message
by using the
up button
or the
down button
.
Step 2.Press the
select softkey button
to enter to
2Recived Box
item or
Sent Box
item.
Note: In Received Box are messages have received from others including new messages and old messages. The ones in Sent Box are
messages have sent out.
Step 3.Press the
select softkey button
to access to the next item. Choose the message you want to read by using the
up button
or the
down
button
.
5.15 DND (Do Not Disturb)
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
To enable Do Not Disturb, use the softkey under the Not disturb.