FLYINGVOICE
Page 35 of 86
example, if your one multi-functional key is configured to display Bob’s phone line, the associate multi-functional key shows you the status of
his phone line:
Green: Line is idle.
Red (steady): Line is active or in use.
Red (blinking): Line is ringing.
In addition, if you have configured the pickup code in BLF, you can press the same multi-functional button to pick up a ringing call at his
extension.
The example below describes the steps to configuration the pickup in BLF from Webpage, user can also configuration from
MENU
.
Configure the pickup code in BLF
:
Step 1.Access to web, and then open
Phone/Multi-Functional Key
webpage
Step 2.Then configures one Exp key to BLF, and set
Pickup Code
(you can get the pickup code from your administrator). The following picture
is a setting example based on Asterisk
Step 3.Press
button to save changes and then press
button to make changes effective.
To pick up a ringing call
:
Step 1.Assuming a ringing call at
003
and the associate LED is blinking.
Step 2.Press
line2 button
, and then press the
Exp key 1
button to pickup the call.
6.3 Shortcut Key
The steps below described how to configuration the shortcut key from Webpage, user can also configuration from
MENU
.
Creating Shortcut Key:
