background image

Carton Contents

IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Husqvarna UK Ltd. Customer Service Department direct
Telephone : 0844 844 4558

Fax : 01325 302530

Safety

General
1. This product is not intended for use by persons

(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the product by a person
responsible for their safety.  Children should be
supervised to ensure that they do not play with the
product. Local regulations may restrict the age of the
operator.

2. Never allow children or people unfamiliar with the

instructions to use the machine.

3. Stop using the machine while people, especially

children, or pets are nearby.

4. Only use the trimmer in the manner and for the functions

described in these instructions.

5. Never operate the trimmer when you are tired, ill or under

the influence of alcohol, drugs or medicine.

6. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
AVOID ACCIDENTAL STARTING.  REMOVE PLUG FROM
MAINS AND KEEP FEET AWAY FROM THE SWITCH LEVER
WHEN:- CLEANING AROUND THE INSIDE OF THE SAFETY
GUARD, REMOVING OR REFITTING SPOOL CAP,
MANUALLY FEEDING OR REPLACING NYLON LINE.
1. The British Standards Institute recommend the use of a

Residual Current Device (R.C.D.) with a tripping current
of not more than 30mA.  Even with a R.C.D. installed
100% safety cannot be guaranteed and safe working
practice must be followed at all times.  Check your
R.C.D . every time you use it.

2. Before use, examine cable for damage.  If there are signs of

damage or ageing, it must be replaced by the manufacturers
service agent or a similar qualified person to avoid hazard.

3. Do not use the trimmer if the electric cables are

damaged or worn. 

4. Immediately disconnect from the mains electricity supply if the

cable is cut, or the insulation is damaged.  Do not touch the
electric cable until the electrical supply has been disconnected.
Do not repair a cut or damaged cable.  Replace it with a new one. 

WARNING When using the product the safety rules must be followed. For your own safety and that of bystanders
please read these instructions before operating the product. Please keep the instructions safe for later use.

Explanation of Symbols on the product

Warning

Read the user instructions carefully to make
sure you understand all the controls and what
they do.

Keep bystanders away.  Do not operate
whilst people especially children or pets
are in the area.

The use of eye protection is recommended to
protect against objects thrown by the cutting
parts.

Do not operate in the rain or leave the product
outdoors while it is raining.

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged.

Warning: The cutting line continues to rotate

after the machine has been switched off.

360º

10m

Switch Handle

Electric Cable with
moulded on plug

Safety-
Guard

Instruction
Manual

Tube

Steady Handle

Trimmer Head

Plant and
Tree Guard

Summary of Contents for Power Trim 500 XT










Reviews: