Update device
Firmware update on PC / MAC / LINUX
Warning: not following step by step the update procedure can
damage your
FlyNet
XC
.
The firmware is regularly updated so you can download the last
version on our web site, in the tab support.
To update the firmware, connect the
FlyNet
XC
to your computer
using the micro USB cable (appears as an USB drive), and copy the
update file (update.hex) to
FlyNet
XC
.
Select
eject
with a right click and wait for the end of the ejection
process before disconnecting the
FlyNet
XC
. Then reconnect it, it will
takes more time than usual to start, (approximately 10 seconds).
That’s it. Your
FlyNet
XC
is up to date.
Firmware update using Logfly
Logfly, is a great PC / Mac logbook app you can download, from our
website (in the support tab section)
To update your firmware, connect the
FlyNet
XC
to your computer
using the micro USB cable (appears as an USB drive). Open the
Logfly app, and click on the GPS button (top left), select GPS and
choose
FlyNet
. If there is a new version available, Logfly will ask, if
you want to update your firmware (click yes).
9
10
www.flynet-vario.com
www.facebook.com/asi.flynet
