Flyron Technology Co., Ltd.
www.flyrontech.com
- 4 -
4). Remove the USB stick from computer safely.
5). Power on the player, and insert the USB stick, and you’ll see the LED light (under the lens of the PIR sensor) starts
blinking, which indicates the player is automatically copying the MP3 files into the internal memory.
6). Once the LED light stops blinking and you hear the “beep” twice, it means the copying / updating is finished, and
now you can pull out the USB stick.
7). Re-power on the player, it’ll work normally with the new MP3 files on the internal memory.
Note
You can load one file or multiple files into the player, but the total size can’t be larger than the internal memory
(4Mbytes), otherwise the update will fail.
Mode Selection
This product supports two work modes. Users can choose the right mode according to the actual requirements through
pressing the button “M/V-” shortly. After pressing the button, the LED light will start blinking immesiately. After a few
seconds when the LED light stops blinking, it means the mode switching is completed.
All repeat mode: It plays one of the the audio files in order after each activation. In another word, when the device get
triggered for the first time, it will play the first audio file, and when the device get triggered again, it will play the second
audio file just like this in a circular way one by one. After trigger to play the last audio file, it will automatically move to
the first one.
Single repeat mode: After each activation, it will always play the current audio file each time. At this time you can short
press the button for NEXT to select which audio file needs to be played.
