4
K2 is flight mode switch
ANGLE
HEDAFREE
Manually
Flight Preparation
1. Turn on the RC transmitter.
2. Connected the power of the aircraft, wait for self check(after self check completion,the indicated light of the
flight control flickers slowly), Do Not move the aircraft during this process.
3. Please make sure the normal connection between the RC transmitter and the aircraft (RC receive and RC
transmit connection fails, the "STATUS" red indicator light on the receiver is on; otherwise,it is off).
4. Unlock the aircraft, check the motor rotation direction.
Aircraft unlock and lock
Mode 2--Unlock (Diagram1) and Lock (Diagram2)
1. Unlock: pull the left stick to the bottom on the right corner for 3 seconds, the red light of the flight control system
is on ,that means unlock successfully, the motor starts to rotate.(Diagram1)
2. Automatic lock: the aircraft has automatic lock function, keep the lowest throttle for 8 seconds, the aircraft will
automatically lock.
3. Manual locking: pull the left stick to the bottom on the left corner for 3 seconds, the red light of the flight control
system flicker slowly ,that means lock successfully.(Diagram2)
Diagram 1
Diagram 2
