5
1. Unlock: pull the right stick to the bottom, meanwhile pull the left stick to the bottom on the right corner for 3
seconds, the red light of the flight control system is on ,that means unlock successfully, the motor starts to
rotate.(Diagram3)
Mode 1--Unlock
（
Diagram3) and Lock
（
Diagram4
）
Diagram 3
Diagram 4
2. Automatic lock: the aircraft has automatic lock function, keep the lowest throttle for 8 seconds, the aircraft will
automatically lock.
3. Manual locking: pull the right stick to the bottom, meanwhile pull the left stick to the bottom on the left corner for
3 seconds, the red light of the flight control system flicker slowly ,that means lock successfully. (Diagram4)
Flight Operation Instruction
Note:
Wrong installation of the propellers will lead to the flight crash.
Please confirm the correct motor rotation direction, then install the propellers properly on the aircraft; when
you install the propellers, please attention to the positive and negative direction of the propellers, one hand
hold the motor, and the other hand tighten the screw.
Be sure to tighten the screw manually to ensure that the propeller is installed correctly and properly.
Take off/ Land
Take off:
After the aircraft is unlocked successfully, the motor starts and release the rocker, slowly push the throttle
lever upward(default left sticker,Mode2), the aircraft takes off.
Install the propellers
Land:
Pull the throttle lever downward slowly, and the aircraft reduce the flight height until it lands on the ground.
Pull the throttle lever to the lowest position to stop the motor, and lock the aircraft manually or wait for it to
lock automatically .
During the flight, do not stop the motor, or the aircraft will crash. Unless special circumstances occur (such as
an aircraft may crash into the crowd), you need stop motor peremptorily to minimize the damage.
Please turn off the aircraft, and then the RC transmitter.
