5
3.
Getting Started
Before operation, install the battery and connect the system as instructed below.
3.1
Transmitter Battery Installation
Danger • Only use specified battery (X4 AA batteries).
Danger • Do not open, disassemble, or attempt to repair the battery.
Danger
• Do not crush/puncture the battery, or short the external contacts.
Danger
• Do not expose to excessive heat or liquids.
Danger
• Do not drop the battery or expose to strong shocks or vibrations.
Danger
• Always store the battery in a cool, dry place.
Danger
• Do not use the battery if damaged.
Battery Type
: AA
Battery Installation
:
1. Open the battery compartment cover.
2. Insert 4 fully-charged AA batteries into the compartment. Make sure that the battery makes good contact with
the battery compartment's contacts.
3. Replace battery compartment cover.
Low battery alarm
: When the battery is lower than 4.2v, the G.LED on the panel will flash slowly.