FS-ST8
Digital Proportional Radio Control System
12
The system setting function is used to set the transmitter system, including setting the language, sound, volume,
alarm time, vibration, vibration grade, battery type, LED color, LED, brightness, time of backlight and autoshutdown.
6.1.4 TX SET - SYSTEM SETTING
Function settings:
1.
Select
SYSTEM SETTING
and press
Scroll Wheel
to enter
.
2.
Select
a function you want to set
and press
Scroll Wheel
, the selected
box is flashing now.
3.
Select
an appropriate
item
and
press
Scroll Wheel
to finish
.
Press
EXIT
to save and exit.
LANGUAGE
To set the system language, including Chinese and English.
SOUND
To set the sound for system and alarm. SYS+ALA means the same
sound for system and alarm.
VOLUME
To set the volume of the sound.
ALARM TIME
To set the time of the idle alarm or whether to enable the
idle alarm function.
VIBRATION
To set the vibration of the system and alarm. SYS+ALA means
the same vibration for system and alarm.
VIBRATION GRADE
To set the vibration grade of the system and alarm.
BATTERY TYPE
To set the battery type.
BAT ALARM
To set the voltage according to the battery type.
LED COLOR
To set the color of the LED.
LED
To set the brightness of the LED.
BRIGHTNESS
To set the brightness of the LCD.
CONTRAST
To set the contrast of the LCD.
TIME
To set the time of the backlight, namely how long the screen takes
to turn off when not in use.
Note: Leaving the screen on for longer will use more power and as such may lead to
reduced battery time.
AUTO SHUTDOWN
To set the time of auto shutdown or turn off it .
