57
For
Slave
, you can only set it to a function, for
the function setting of
Slave
, please refer to the
descriptions of
Master
above.
Sets related settings of
Master
.
Master
can be set to
a control or a function.
Function setup:
1. Tap the function box next to
Master
to enter.
2. Tap
Stick or Knob
to enter if you want to set
Master
to a control. Tap the desired contol or
knob you want to set. Then click to return to the
previous interface.
3. Tap
Func.
(function) to enter if you want to set
Master
to a function. Tap the desired function you
want to set. Then click to return to the previous
interface.
Master selection
Master selection
Sets related trim settings of
Master
.
Function setup:
Tap the function box below
Master Trim
. You can
click repeatedly toggle between
Off
or
On
.
Note: When the trim is set to
On
,
Master
trim changes will also
affect
Slave
. When it is set to
Off
,
Master
trim changes will not
affect
Slave
.
Master Link/Slave link
The link can be set for the master and slave, when
the master is set to a specific function. The link is to
set whether the master function will affect the slave
function when it is affected by other mixes. Slave link
is to achieve the result of this group of mixers used as
a source of link for other mixes to select this group of
slave functions as its master.
Function setup:
Tap the function box below
Master Link
. You can click
repeatedlytoggle among
NOR
(normal),
REV
(reverse)
or
OFF
.
Note:
Nor
(normal) refers to a forward call, and
REV
(reverse)
refers to a reverse call. When
Master Link
is set to
OFF
, other
function mixing volume will not affect
Slave
.
Take the link setting between
Mix1
and
Mix2
as an
example.
Mix1
Mix2
Master Func. RUDD
Master Func.
AILE
Link OFF
Link
NOR/REV
Slave Func. AILE
Slave Func.
THRO
Link NOR/REV
Link
OFF
